Interview Archives - Podfeet Podcasts

Hand holding a white, cylindrical smart humming bird feeder with two small black camera lenses on the front, a green downward curving tube which models the stem of a flower, and a red flower-shaped dual feeding port. The feeder is displayed indoors at what appears to be a trade show.

CES 2026: Birdfy Smart Bird Feeders

Allison interviews Prima Shi, Chief Marketing Officer of Birdfy, about their array of currently available smart bird feeders and fountains, along with the yet-to-be-released Hum Bloom smart hummingbird feeder. Prima shows the Hum Bloom, Birdfy’s newest smart hummingbird feeder. It is the world’s first hummingbird feeder that provides 4K/120fps video as well as high-resolution photos. […]

White wireframe diagram representing Aerleum's reactor. It shows a cylindrical structure with an inner slatted cylinder and a central vertical tube, shown on a black background.

CES 2026: Aerleum Synthetic Fuels Made From Air

Allison interviews Steven Bardey from Aerleum about their hardware and processes that convert chemicals found in ordinary air to usable fuels. Using a mockup, Steven explained how an Aerleum reactor can take CO2 out of the air and combine it with green hydrogen (H2) to make methanol. The cost of producing methanol using the Aerleum […]

Slim, dark gray rectangular solid-state battery labeled “DONUT LABS | Solid State,” shown at an angle with two metal connector tabs protruding from one end against a dark gradient background.

CES 2026: Donut Lab Solid State Battery and Motor Integrated into Verge Motorcycle

Steve Sheridan interviews Marko Lehtimäki, Co-founder and CEO of Donut Lab, about their production-ready solid-state battery designed to integrate into several platforms and applications. The Donut battery has a high energy density of 400 Wh/kg and can support 100,000 charge cycles. Due to its solid-state design, it is extremely safe and low cost when compared […]

Front view of the Glide unit which comprised of a small base with two 7.5-inch side-by-side wheels that steer the device to guide the user. A telescoping handle extends upward from the base to a target height just below the waist. The handle is collapsable down to 25 inches when fully compacted. Visible on the front of the lower part of the handle is a small circular sensor. The base unit and telescoping rod are white while the handle and wheels are black. A magenta colored small handle extends frontward from the base unit for carrying the device when it’s collapsed.

CSUN 2025: Glidance Autonomous Self-Guided Mobility Aid

Allison interviews Amos Miller, Founder and CEO of Guidance, about Glide, their AI-powered mobility aid designed to help people who are blind or have low vision navigate with confidence, comfort, and ease. Glidance’s Sensible Wayfinding Service is a high-intensity computer vision and sense-making AI system built by Glidance. It connects all active Glides and powers […]

CSUN 2025: ImaginAble Solutions Guided Hands

Allison interviews Celeste D’Costa from Imaginable Solutions about their Guided Hands assistive device for people with limited hand mobility. The device enables anyone with limited fine motor skills to write, paint, draw, and access technology. Guided Hands does what the name says: it promotes guided hand movements. It has a 2-D sliding system that encourages […]

View of the MouthPad device from below looking up into what would be the roof of the mouth. The device’s perimeter is made of clear dental resin which is form-fitted to the roof of the mouth and upper molars. Located in the center of the device is a copper-colored lattice of small cells that acts as the trackpad. Mounted on one side just outside the rear molars is a small clear capsule containing the electronics and battery that operate MouthPad. Connecting the electronics capsule to the trackpad is a small, flat wire that is embedded in the clear MouthPad material.

CSUN 2025: Augmental MouthPad Smart Mouthwear

Allison interviews Virgie Hoban from Augmental about the innovative MouthPad device, which provides hands-free and more accessible control for personal electronic devices. The MouthPad is smart mouthwear that enables hands-free control of your phone, computer, and tablet via a Bluetooth connection. Perched on the roof of your mouth, the device converts subtle tongue and head […]

CSUN 2025: Maggie Vision iVR Headset for People with Low Vision

June 3, 2025
by Steve Sheridan

Allison interviews Elizabeth Evans, owner and CEO of Maggie Vision, about their lightweight, wearable headset designed for people with low vision. The Maggie iVR headset provides magnification and color contrast vision enhancement for the user. To use Maggie iVR, the user slides their iPhone into the back of the headset. The iPhone’s basic camera functions […]

CSUN 2025: Jamworks AI Notetaking App for Students

Allison interviews Jenn Sponer from Jamworks about their note-taking app for personalized study experiences. Jamworks records a spoken lecture off of the student’s device (e.g., a laptop or mobile phone) and then uses that recording to create notes in several selectable formats for better understanding. Jamworks has special features that aid disabled students in consuming […]

View of the Case For Vision from above and the front. It shows a mobile phone mounted in a case that is supported by two framed legs on either side and sits about 6 inches above a paper receipt. The phone’s display shows about a 2:1 magnified view of the receipt making it easier to read by someone with low vision. The Case For Vision case and its legs are black in color. The case and receipt sit on top of a light colored wood table top.

CSUN 2025: Case For Vision Assistive Devices for People with Vision Loss

Allison interviews Igor Feinberg from Case For Vision about their phone case that assists visually impaired people or those who suffer from age-related vision loss. The Case For Vision is an innovative iPhone-based optical mechanical case that functions as a hands-free, high-quality magnifier. When used with the Case For Vision 2.0 specialized software app, it […]

CSUN 2025: Be My Eyes Connects Visually Impaired with Sighted Volunteers

Allison interviews Hans Jørgen Wiberg, Founder of Be My Eyes, about their service which connects blind or low-vision users who want assistance with volunteers and companies worldwide through live video and AI. To access the service, you use the Be My Eyes app on a smartphone to get free, instant visual descriptions anytime, day or […]

1 2 3 4 … 37 38 39

Posts navigation